News
-
The influence of curvature radius of convex and concave section on the belt conveyor
The influence of curvature radius of convex and concave section on the belt conveyor Arch in the middle of the convex belt cross section The convex section of the belt conveyor often occurs in the middle of the belt section in the direction of the arch, both central protruding. And the belt ...Read more -
Conveyer often encountered problems and solutions
One. conveyor belt running deviation: 1. The deviation of the outer cylinder of the roller is too large, the roller is not straight (the straightness is out of tolerance), and the rotation is not flexible, etc., will also cause the belt running deviation. 2. The installa...Read more -
What are the safety technical measures and matters
What are the safety technical measures and matters needing attention when the belt conveyor is installed underground in coal mine? Preparations before installation 1: Technical preparation A: The geosurvey department is required to release the center line of the belt of ...Read more -
Handling of belt conveyor belt deviation
Belt deviation is the most common fault when the belt conveyor is running. We should pay attention to the dimensional accuracy of installation and daily maintenance. There are many reasons for deviation, which need to be treated differently according to different reasons. 1. Adjust the bearing...Read more -
Elevator common faults and solutions
Elevator is a kind of mechanical equipment, in the use of time in the process will inevitably appear some faults and minor faults, so in the face of sudden situation how to deal with it? The following elevator manufacturer Pack King Automatic Equipment Co., Ltd. for the majority of elevator user...Read more -
Inclined belt conveyor why will slip?
Inclined belt conveyor why will slip? Inclined conveyor why often appear skid phenomenon? How to solve the skidding phenomenon? Angle of belt conveyor is the use of conveyor belt for conveying material social transmission torque and friction between the roller, and then send the material Or...Read more -
Broken shaft of reducer
The broken shaft of the belt conveyor reducer occurs on the high-speed shaft of the reducer. The most common is to use the first stage of the reducer for the vertical bevel gear shaft of the high speed shaft. There are two main reasons for shaft breakage. The design strength of high speed shaft o...Read more
